For use with Serotec's unconjugated monoclonal and polyclonal antibodies.

Note: This method provides a general procedure for use with the majority of Serotec reagents. In some cases specific recommendations are provided on product datasheets, and these methods should always be used in conjunction with product and batch specific information provided with each vial. Please note that a certain level of technical skill and immunological knowledge is required for the successful design and implementation of these techniques - these are guidelines only and may need to be adjusted for particular applications.

1. Prepare slides in appropriate manner. In most cases Serotec recommends that tissues are snap-frozen in liquid nitrogen, 4-6mm sections prepared using a cryostat.
2. Allow sections to air dry for an least 1 hour.
3. Fix sections in cold dry acetone for 10 minutes.
4. Block endogenous peroxidase, if necessary, by immersing slides in 0.3% H₂O₂ in 70% methanol/TBS for 30 minutes. Wash once in TBS.
5. Incubate sections for 10 minutes in 10% normal serum from species in which secondary was raised. Tap excess off the slides before staining.
6. Incubate sections in primary antibody for at least 1 hour at room temperature in a humid chamber or overnight at 4^oC. Wash three times in TBS.
7. Add biotinylated secondary antibody at recommended dilution (see specific datasheet for details). Incubate for at least 30 minutes at room temperature. Wash three times in TBS.
8. Add enzyme conjugated streptavidin at recommended dilution (see specific datasheet for details). Incubate for at least 30 minutes at room temperature. Wash three times in TBS.
9. Incubate in appropriate substrate solution for recommended period of time (Serotec recommends the use of DAB substrate with HRP conjugated antibodies, and Fast Red / Napthol AS-MX for Alkaline Phosphatase conjugated antibodies). Wash once in water.
10. Counterstain in haematoxylin, 1-10 minutes. 'Blue' in running water for 5 minutes.
11. Mount in aqueous mounting medium e.g. Histotec (HIS002), or alternatively dehydrate through alcohols and xylene solvent and mount in synthetic mountant.

Notes:

NB. Do not allow slides to dry out after the fixation step, as drying will result in damage to the tissue structure.

Note that certain substances are soluble in alcohol - please refer to supplier information for details.

Appropriate control samples should always be included. We recommend the inclusion of isotype-matched controls in each case. It may also be useful to include a control in which no primary antibody is used at all, to determine any non-specific binding of the secondary reagents to the target tissue.

Please contact Serotec's Technical Services Department for details of recommended isotype controls and secondary reagents for specific applications.

Solutions used:

TBS (stock solution x10 concentrated)

Sodium chloride 87.66g, Tris 60.55g, Distilled water 1 litre. Adjust pH to 7.4 using concentrated HCl.